Xingtai Ningji
Xingtai Pingxi 4 Block product marking: Mark in the order of product name (code ACB), strength level, bulk density level, specification size, product grade,Xingtai Qingheautoclaved aerated concrete block,, and standard number. Specification for autoclaved aerated concrete blocks Scope This standard specifies the product classification, technical requirements, test methods, inspection rules, product quality instructions, stacking, and transportation of autoclaved aerated concrete blocks. Xingtai Qinghe. When laying aerated bricks, the distance between the bottom of the wall needs to be filled with small solid bricks, but the maximum cannot exceed 4 Block product marking: Mark in the order of product name (code ACB), strength level, bulk density level, specification size, product grade, and standard number. . If the purchasing unit needs other specifications, they can negotiate with the production factory to determine. 2 Blocks are classified according to their compressive strength and volumetric density. 3 Blocks are divided into three levels based on dimensional deviation, appearance quality volumetric density, and compressive strength: excellent product (A), first-class product (B), qualified product (C).
2 Blocks are classified according to their compressive strength and volumetric density. It is strictly prohibited to use water soaked bricks and bricks that lack water. This standard applies to autoclaved aerated concrete blocks (hereinafter referred to as blocks) used for walls and insulation in civil and industrial buildings. Lets see. This standard applies to autoclaved aerated concrete blocks (hereinafter referred to as blocks) used for walls and insulation in civil and industrial buildings. Control standard for radioactive substances in building materials mixed with industrial waste - Determination of steady-state thermal resistance and related characteristics of insulation materials - Protective hot plate method for testing the performance of aerated concrete - General rules - Test methods for volumetric density, moisture content and water absorption of aerated concrete - Mechanical properties of aerated concrete - Test methods for drying shrinkage of aerated concrete - Test methods for frost resistance of aerated concrete (9 - Terminology of bricks and blocks 3 Product classification 1 Specifications: The specifications and dimensions of the blocks are shown in Table 3 Blocks are divided into three levels based on dimensional deviation, appearance quality, volumetric density, first-class product (B), qualified product (C).
Specification for autoclaved aerated concrete blocks Scope This standard specifies the product classification, technical requirements, test methods, inspection rules, product quality instructions, stacking, and transportation of autoclaved aerated concrete blocks. Home page recommendation. The following standards contain provisions that constitute the provisions of this standard by reference in this standard. At the time of publication of this standard, all versions shown are valid. All standards will be revised, autoclaved sand aerated concrete blocks, and internal partition wall autoclaved sand aerated concrete blocks as the main raw materials, with an appropriate amount of aerating agent, regulator, bubble stabilizer added, and processed through batching, mixing, pouring, static stopping, cutting, The sound insulation performance is twice that of clay bricks, the impermeability performance is more than twice that of clay bricks, and the fire resistance performance is 6-8 times that of reinforced concrete. The masonry strength of the block is about 80% of its own strength (30% for red bricks). Xingtai Qinghe. The following standards contain provisions that constitute the provisions of this standard by reference in this standard. At the time of publication of this standard all versions shown are valid. All standards will be revised,Xingtai QingheAerated block, and all parties using this standard should explore the possibility of using the latest versions of the following standards. Marking examples: strength level A5, bulk density level B05, superior as the main raw materials, with an appropriate amount of aerating agent,Xingtai Qingheaerated block brick, regulator, bubble stabilizer added, and processed through batching mixing, pouring, static stopping, cutting, and high-pressure steam curing. The unit volume weight of autoclaved aerated concrete blocks is one-third of that of clay bricks, and the insulation performance is 3-4 times that of clay bricks, The sound insulation performance is twice that of clay bricks, the impermeability performance is more than twice that of clay bricks, and the fire resistance performance is 6-8 times that of reinforced concrete. The masonry strength of the block is about 80% of its own strength (30% for red bricks).