ValpalotaOutdoIt is strictly prohibited to run the engine for a long time in a closed garage. The exhaust gas from the elevator engine contains carbon monoxide. This is a toxic gas that has been exposed to low concentrations of carbon monoxide for a long time. It can cause symptoms such as headache, shortness of breath, nausea and vomiting, body weakness and dizziness, psychological confusion, and even brain damage. In severe cases, it can cause death such as starting the engine of the equipment in the garage.
The fault diagnosis equipment on the elevator can inform the operator of possible errors. The chassis is high and suitable for walking on rough surfaces. Planning is practical, reliable, and easy to repair and maintain. Diesel powered models have two wheel, four wheel drive, and steering. Free turning equipment. Urgent descent system. The operation height ranges from 4 meters to 22 meters, with advanced equipment and high-power power.
Valpalota.Platform part: It is a steel structure platform that carries heavy objects, which can be closed (i.e. car type) or open, with guide rollers or guide shoes installed on both sides. The bottom of the platform can be connected to a lifting oil cylinder or a lifting shear fork shaped steel frame.
The single column elevator is an indoor type, widely used for high-altitude operations in various industries such as star hotels and large supermarkets. It has balanced lifting and easy operation, and can enter general lobbies. It can easily enter and exit the elevator with low power consumption, and does not harm the ground during work. It can be used for wall sticking and exploration work,ValpalotaElectric three wheel hydraulic lifting platform, and there are no dead corners during work.
.Test run or use completed. The elevator and site must be cleaned. When closing the hoist cover or other assembly cover. Items such as tools, rags, and removed parts should be checked for forgetting. After confirming that there are no errors. Only then can it be closed.
Support is an important preparatory work for elevator operation. The elevator should choose a flat ground, such as a foundation or uneven terrain, and must be padded with sleepers before proceeding with work.
To reduce noise, increase the clearance inside the platform and also make the transmission more stable and the mechanism vibration less.
Due to its beautiful appearance, light weight flexible operation, and convenient implementation, elevators are particularly suitable for various high-altitude work platforms, such as high-altitude maintenance, decoration, cleaning and anti-corrosion, etc. At the same time, we should always keep in mind the safety operation regulations for it.
Check the chain system: Before starting the machine, carefully check the operating condition of the chain system and adjust it if necessary to evenly tighten each chain. Lock it with a spare nut, and apply a small amount of No. 20 oil to each part of the chain; Standing on the ground, press the up and down buttons to check the mechanical operation check if the chain is detached from the sprocket, and check if the sprocket support plate is loose. Check the oil tank: Before starting the machine, check if there is enough hydraulic oil in the tank. If there is insufficient hydraulic oil, it should be replenished in a timely manner. Check whether the action of the leakage protector and high breaking circuit breaker is sensitive. The working mode of the elevator operator on the platform: The operator should lift the railing or climb the ladder from the front to enter the guardrail, lock the guardrail in the correct position, stand in the center position, press the up button,ValpalotaPrice scissors hydraulic lifting platform, slowly raise the workbench, stop at the desired position, and start working. When working at heights, do not shake or step on guardrails to avoid accidents. Press the descent button to descend. If there is a sudden power outage during work, the emergency manual lowering device can be activated to safely lower the elevator and return to its initial position. Long term manufacturer of mobile elevators, 20 year old brand, with price advantages and guaranteed quality!
The lifting drive chain is a double chain structure, using industrial plate chains with high bearing capacity and safety factor.
Inspection items.The vehicle body should be grounded according to regulations, and the lifting operation should be commanded by the person in charge of the work. The person in charge should follow the standard signal and communicate with the lift operator. The signal emitted must be clear and accurate.
Operators on the work platform should wear safety belts and be sure to take protective measures when working in live areas.
The elevator is made of high-strength and high-quality materials, which have the advantages of beautiful appearance, small size, light weight, balanced lifting, safety and reliability. It is widely used in factories, hotels, restaurants, stations, airports, theaters, exhibition halls, and other places. It is a good safety companion for maintenance of equipment, painting and decoration, replacement of lighting fixtures, electrical appliances, cleaning and maintenance, and other purposes.
The hydraulic system is equipped with an emergency descent function to prevent power outages and unexpected situations, and the emergency operation is simple.
Job description.The fault diagnosis equipment on the elevator can inform the operator of possible errors. The chassis is high and suitable for walking on rough surfaces. Planning is practical, reliable, and easy to repair and maintain. Diesel powered models have two wheel, four wheel drive, and steering. Free turning equipment. Urgent descent system. The operation height ranges from 4 meters to 22 meters, with advanced equipment and high-power power.
Only after the trial load test can people be used. Our company has been engaged in various types of mobile elevator manufacturers and other materials for years, and operates with integrity. Welcome to call!
Furthermore, it is necessary to raise and lower the elevator several times at regular intervals to ensure that the hydraulic oil inside and the grease on the components are not misaligned due to prolonged immobility. It is also important to pay attention to the operation of the components to be observed. If the temperature is relatively low,ValpalotaPush-pull hydraulic lifting platform, it is necessary to frequently check the hydraulic oil of the elevator. If it is abnormal, including mobile elevator manufacturers
Valpalota.Check the hydraulic oil quality and level. When the lifting platform is raised to a high position, the hydraulic oil level should be 40-50 millimeters higher than the bottom of the oil tank. When the color of hydraulic oil darkens, the oil becomes sticky, or there are foreign objects such as gravel in the oil, how should the elevator be maintained? While we perform monthly maintenance on the elevator we should not forget to perform year-end maintenance on the elevator. Let's take a look at how the elevator should undergo year-end maintenance.
Support is an important preparatory work for elevator operation. The elevator should choose a flat ground, such as a foundation or uneven terrain, and must be padded with sleepers before proceeding with work.
Check the rollers, intermediate shafts, and bearings; Oil cylinder pin and bearing; Equality and wear of the hinge shaft and bearings of the boom; Fill the above components with oil. The service life of bearings can also be greatly enhanced.