Xingtai Ningjinautoclaved aerated concrete block,reliable

　　as the main raw materials, with an appropriate amount of aerating agent regulator, bubble stabilizer added, and processed through batching, mixing, pouring, static stopping, cutting and high-pressure steam curing. The unit volume weight of autoclaved aerated concrete blocks is one-third of that of clay bricks, and the insulation performance is 3-4 times that of clay bricks, The sound insulation performance is twice that of clay bricks, and the fire resistance performance is 6-8 times that of reinforced concrete. The masonry strength of the block is about 80% of its own strength (30% for red bricks).

　　as the main raw materials, regulator, bubble stabilizer added, and processed through batching, mixing, pouring, static stopping, cutting, and high-pressure steam curing. The unit volume weight of autoclaved aerated concrete blocks is one-third of that of clay bricks and the insulation performance is 3-4 times that of clay bricks, The sound insulation performance is twice that of clay bricks, the impermeability performance is more than twice that of clay bricks, and the fire resistance performance is 6-8 times that of reinforced concrete. The masonry strength of the block is about 80% of its own strength (30% for red bricks).

Xingtai Ningjin.　　Advantages of aerated bricks: Concrete is used as the main raw material for aerated bricks, and then air is added inside, which not only

　　4 Block product marking: Mark in the order of product name (code ACB), strength level, bulk density level, specification size, product grade, and standard number.

.　　Specification for autoclaved aerated concrete blocks Scope This standard specifies the product classification, technical requirements, test methods, inspection rules, product quality instructions, stacking, and transportation of autoclaved aerated concrete blocks.

　　Control standard for radioactive substances in building materials mixed with industrial waste - Determination of steady-state thermal resistance and related characteristics of insulation materials - Protective hot plate method for testing the performance of aerated concrete - General rules - Test methods for volumetric density, moisture content, and water absorption of aerated concrete - Mechanical properties of aerated concrete - Test methods for drying shrinkage of aerated concrete - Test methods for frost resistance of aerated concrete (9 - Terminology of bricks and blocks 3 Product classification 1 Specifications: The specifications and dimensions of the blocks are shown in Table

Xingtai Ningjinautoclaved aerated concrete block,reliable

　　There are six levels of volumetric density: B03, B04,Xingtai Ningjinaerated block brick, B05, B07, and B0

　　 When laying aerated bricks, the distance between the bottom of the wall needs to be filled with small solid bricks, but the maximum cannot exceed

　　There are seven strength levels: A0, A0, A5, A5, A5, and A

technological innovation.　　 The following standards contain provisions that constitute the provisions of this standard by reference in this standard. At the time of publication of this standard, all versions shown are valid. All standards will be revised, B04,Xingtai Ningjinautoclaved aerated concrete block,, B05, B06, B07, and B0

Xingtai Ningjinautoclaved aerated concrete block,reliable

Where is good.　　as the main raw materials, with an appropriate amount of aerating agent,Xingtai Ningjin block,, regulator bubble stabilizer added, and processed through batching, mixing, pouring, static stopping cutting, and high-pressure steam curing. The unit volume weight of autoclaved aerated concrete blocks is one-third of that of clay bricks, and the insulation performance is 3-4 times that of clay bricks, The sound insulation performance is twice that of clay bricks, the impermeability performance is more than twice that of clay bricks, and the fire resistance performance is 6-8 times that of reinforced concrete. The masonry strength of the block is about 80% of its own strength (30% for red bricks).

　　The construction specifications for aerated block wall masonry require that: Air bricks used for wall masonry must have a production date exceeding

　　This standard applies to autoclaved aerated concrete blocks (hereinafter referred to as blocks) used for walls and insulation in civil and industrial buildings.

Xingtai Ningjin.　　If the purchasing unit needs other specifications, they can negotiate with the production factory to determine.

　　There are seven strength levels: A0, A0, A5, A5, A0, A5, and A

　　If the purchasing unit needs other specifications, they can negotiate with the production factory to determine.