DuisburgMobile hydraulic loading platformIntroduction of performance characteristics

announcer:hp391HP142030639 release time:2024-06-08 17:03:08

DuisburgHydraulic freight platform,

Then, the lifting platform platform platform that carries the load needs to be balanced, and no deviation of one side is allowed. The lifting of goods does not allow people to stand on both sides of the platform, and the lifting of goods should try to maintain a stable and uniform speed.

For customers to use and operate the lifting platform for a long time, the editor briefly introduces how to maintain and repair the lifting platform: First of all, normal maintenance is mainly focused on prevention, especially if any damage or malfunction is detected and corrected or repaired in a timely manner. Careful inspection and maintenance at this time can save costs and avoid larger problems, resulting in costly repairs.

Duisburg.The above detailed introduction, I believe everyone has a comprehensive understanding and understanding of the use of hydraulic elevators and these details cannot be ignored during the use process.

Remove and disassemble the lowering valve, blow the valve core clean with compressed air, and then reinstall it.

.two

In short, when using a fixed loading and unloading platform, there is basically no need to worry about stability, providing more guarantees, so many times it can be used with confidence.

Firstly, an obvious advantage is its high safety performance. The guide rail hydraulic lifting platform adopts heavy-duty chain transmission, hydraulic explosion-proof oil pipes, safety devices to prevent overloading, multiple limit switch protection, door and power outage protection, and multi-layer building interaction. Therefore, the safety factor of the guide rail hydraulic lifting platform is still very high, much higher than that of ordinary platforms.


DuisburgMobile hydraulic loading platformIntroduction of performance characteristics



Hydraulic lifting platform is a non scissor type hydraulic lifting platform and is also a widely used vertical transportation equipment for goods, among which the commonly used is the guide rail hydraulic lifting platform. Mainly driven by electric motors and oil pumps, heavy chains are driven by oil cylinders to drive the lifting and lowering of hydraulic lifting platforms. It is also widely used for vertical transportation of goods between high-rise buildings. So what are the advantages and characteristics of guide rail hydraulic lifting platforms?

To understand the operation of the mechanism, the main focus is on whether it is normal and whether there is noise during use. When faults are found, timely troubleshooting is necessary to ensure the normal operation and use of the machine. During installation, it is necessary to disassemble or adjust the rotating mechanism. In this case, and of course, the meshing clearance should also be appropriate. If this is not appropriate, then the machinery cannot operate normally.

Later, when there is a major malfunction of the lifting platform, it should be repaired by professional personnel as soon as possible. After the malfunction occurs, it should not be used again to avoid accidents, personnel and property losses.

Convenient and efficient.When using the elevator, the legs must be opened first. If the legs are not lifted, it is strictly prohibited to lift them.

Drain all the hydraulic oil in the oil tank, open the oil tank,DuisburgHydraulic experimental platform, take out the oil suction filter, clean it, and return it to the oil tank. Install it in its original position. Fill the fuel tank with new oil.

After 5000 hours of operation of the elevator, repair the mechanical and electrical systems.


DuisburgMobile hydraulic loading platformIntroduction of performance characteristics



Using Help

Convenient and efficient.Later, when there is a major malfunction of the lifting platform, it should be repaired by professional personnel as soon as possible. After the malfunction occurs,DuisburgSmall hydraulic platform lift truck, it should not be used again to avoid accidents, personnel and property losses.

In this situation, it is necessary to regularly check all wires and cables used to ensure that there is no damage. When there is wrapping or damage the parts should be replaced in a timely manner. I believe many people have encountered overheating in electric motors. In this case, it is necessary to stop the motor in a timely manner, and then troubleshoot the problem before continuing to use it. This way, the motor shaft can be used and the effect is good.

Convert to Simplified Chinese Convert to Traditional Chinese without converting the number of blank lines between paragraphs before and after:

Duisburg.High altitude work requires the use of tool bags, and heavier and larger high-altitude work tools should be hung on stable components and cannot be placed randomly to avoid the occurrence of high-altitude falling accidents.

If there are problems inside the elevator and electrical professionals are present, among which the commonly used is the guide rail hydraulic lifting platform. Mainly driven by electric motors and oil pumps, heavy chains are driven by oil cylinders to drive the lifting and lowering of hydraulic lifting platforms. It is also widely used for vertical transportation of goods between high-rise buildings. So, what are the advantages and characteristics of guide rail hydraulic lifting platforms?