which minimizes the deflection of the high-altitude work platform. Equipped with automatic walking function, with flexible movement, convenient operation, and easy lifting. Only one person can complete forward, backward, turning, slow walking, and up and down movements, saving labor and effort. Can be designed and produced according to user requirements.
Furthermore, it is necessary to raise and lower the elevator several times at regular intervals to ensure that the hydraulic oil inside and the grease on the components are not misaligned due to prolonged immobility. It is also important to pay attention to the operation of the components to be observed. If the temperature is relatively low, it is necessary to frequently check the hydraulic oil of the elevator. If it is abnormal, it should be replaced with new hydraulic oil in a timely manner. Mechanical maintenance should also be done well, otherwise oxidation and deterioration may occur and cause damage to the elevator. Specializing in product and renewable resource business, including mobile elevator manufacturers
Ancona.Usage: * Ordinary and * practical, and climbing homework may no longer be a hassle. Widely used in stations, factories, hotels, buildings, shopping malls, airports, stadiums, docks, hotels, airports, and various occasions that require high-altitude operations.
.Elevator operation status: The elevator products are made of high-strength and high-quality materials, which can be divided into single masted, double masted, three masted, four masted and six masted types according to the lifting height. Generally,Anconahydraulic lift, single masted types are used when the lifting height is below 8 meters, double masted types are used when the lifting height is between 10 meters and 14 meters, and three masted or four masted types are used when the lifting height is between 15 meters and 18 meters.
How should the elevator be maintained? We have a lift that has been in use for a while but it's not working properly. Do you know the reason? This is because the elevator needs to be maintained after being used for a period of time. Let's take a look at the maintenance process of the elevator: (1) During monthly maintenance of the elevator, personnel must enter and work inside the elevator and the elevator must be suspended to prevent sudden lowering of the elevator and causing casualties.
Spare parts are intact and of the same model. Items such as valves and seals should be placed in dry and dust-free packaging. When the maintenance of hydraulic elevators requires entry into the interior of the platform for work, the working surface of the elevator must be fixed or supported firmly by a crane or other equipment after the elevator is lifted before entering the interior of the living platform for work. Before the maintenance of the hydraulic aluminum alloy elevator starts, the tools used must be counted. After the maintenance is completed, and counted to prevent the tools used for maintenance from being left inside the equipment, especially in the distribution box. When repairing the hydraulic system of the elevator, it is necessary to keep the maintenance site clean and dust-free. When repairing the fastening screws of the elevator, it is necessary to press the correct angle first. When tightening screws, use a torque wrench to prevent excessive damage to the screws. After the maintenance is completed and before the power on test, it is necessary to count the number of maintenance personnel to ensure that there is no one inside the elevator. This is very necessary for the maintenance of large fixed hydraulic elevators. After counting the number of people, inspecting and repairing the equipment and the maintenance site, the power transmission test can only be carried out. After the elevator maintenance is completed, the equipment maintenance record must be filled out which should include the equipment maintenance date, personnel participating in the maintenance, maintenance items, brand, model and specification of replaced parts, maintenance effect and whether the equipment still has problems after the maintenance is completed.
Secondly, frequent voltage instability can directly burn out the power unit motor. The consequences of motor burning are very serious, which can lead to an instant decrease in pressure. If the equipment is not equipped with safety devices such as relief valves or explosion-proof valves, it can cause the lifting equipment to fall, leading to accidents. At the same time, replacing a new power unit also requires a certain cost.
It can provide us with familiar transportation conditions for various mechanical products and engineering goods. Elevators provide us with direct up and down transportation conditions, as well as safety for high-altitude operations. They have lifting platforms and semi enclosed or fully enclosed products, providing us with different operating methods. The lifting platform of the entire elevator can bring us gravitational loads, and create a hydraulic elevator with different power supplies, Satisfy high-power cargo transportation.
The equipment is equipped with leakage protection switches, emergency stop switches, extreme electrical limit switches, etc. The button boxes are all waterproof in design.
How much does it cost?.Overloading or long-term eccentric loading operations are strictly prohibited, as this not only reduces the service life but also poses safety hazards.
Blow out the plunger with compressed air, then install it and reinstall it.
How should the elevator be maintained? When carrying out elevator maintenance, we should not only perform monthly maintenance, but also conduct year-end maintenance. The inspection positions for year-end maintenance and monthly maintenance are different, and we need to take into account both when carrying out maintenance.
The fault diagnosis equipment on the elevator can inform the operator of possible errors. The chassis is high and suitable for walking on rough surfaces. Planning is practical, reliable, and easy to repair and maintain. Diesel powered models have two wheel,Ancona4-meter hydraulic lifting platform, four wheel drive and steering. Free turning equipment. Urgent descent system. The operation height ranges from 4 meters to 22 meters, with advanced equipment and high-power power.
Product range.Hydraulic lifting platform products are divided into curved arm hydraulic elevators, scissor fork hydraulic elevators, mast hydraulic elevators, and straight arm hydraulic elevators according to their working modes. Hydraulic elevator is a replacement product of folding arm elevator (lifting platform) and scissor fork elevator (lifting platform). It can be widely used for the decoration and decoration of stations, docks, airports, hotels, posts and telecommunications, grain depots cleaning companies, public building facades, or the installation and maintenance of power systems. This elevator has the advantages of light weight, self-propelled walking, self supporting legs, simple operation, large working area, and especially the ability to cross obstacles for high-altitude operations.
Usage: * Ordinary and * practical, and climbing homework may no longer be a hassle. Widely used in stations, factories, hotels, buildings, shopping malls, airports, stadiums, docks, hotels, airports,AnconaAutomatic hydraulic lifting platform, and various occasions that require high-altitude operations.
The garage door should be opened or the exhaust device should be opened. So that the exhaust gas can be stored in the garage at any time. Even if working outdoors. Also, do not stay near the exhaust pipe of the working engine for a long time.
Ancona.How to maintain the elevator when it is not in use? If the elevator is placed in the warehouse, its weight is borne by the four parts of the elevator. Over time, the tires of the elevator may deform due to excessive pressure. So when we are idle, we must open its four support legs to bear the weight of the elevator itself, in order to protect the rubber tires.
Strictly follow the operating instructions of the elevator for safe use and strictly prohibit illegal operations.
Compact structure, small size in transportation status, able to enter the car of general elevators, as well as smooth door openings and narrow passages.